常見問題集

很抱歉，常見問答集沒有中文版本。下方為英文版本。

Top-10 FAQs 10 大常見問答集

• Why does the AUTO button on my monitor not work properly?
• How do I install the .inf and .icm monitor installation files on my Windows XP based computer?
• Get lost when you are making monitor adjustments.: Forgot previous monitor settings.
• Install the .inf and .icm files into your computer.: Installation procedure for Windows 2000
• Install the .inf and .icm files into your computer.: Installation procedure for Windows Me
• My monitor shows the message: NO VIDEO INPUT. What can be the cause of this message?
• I have no picture on the display and the power LED lights up amber or yellow.
• SmartControl - SmartControl program: After installing SmartControl, when clicking on SmartControl tab, nothing shows up after a while or a failure message shows, what happened?
• SmartControl - SmartControl program: The SmartControl functions well at the beginning, but it is not workable, what can I do?
• Screen shows: THIS IS 85HZ OVERDRIVE....: Input signal from your PC is 85Hz -- outside the range that the monitor can display.

Before you buy (1)

• Why does the AUTO button on my monitor not work properly?

開始使用 (4)

• How do I install the .inf and .icm monitor installation files on my Windows XP based computer?
• Get lost when you are making monitor adjustments.: Forgot previous monitor settings.
• Install the .inf and .icm files into your computer.: Installation procedure for Windows 2000
• Install the .inf and .icm files into your computer.: Installation procedure for Windows Me

Use and Learn (14)

• My monitor shows the message: NO VIDEO INPUT. What can be the cause of this message?
• I have no picture on the display and the power LED lights up amber or yellow.
• Screen shows: THIS IS 85HZ OVERDRIVE....: Input signal from your PC is 85Hz -- outside the range that the monitor can display.
• Imaging problems: Vertical flicker appears.
• Imaging problems: The screen is too bright or too dark.
• My display position is not centered on the screen or incorrect. How can I resolve this?
• No picture: No picture (Power LED not lit)
• How to clean the LCD surface?: Clean the LCD surface.
• Switching on takes a long time.: The monitor takes sometime to power on.
• Screen shows: CANNOT DISPLAY THIS VIDEO MODE...?: Input signal from your computer is not in a standard video mode or is out of the monitor’s scanning range.
• My monitor shows the message: OSD MAIN CONTROLS LOCKED. What can be the cause of this message?
• Imaging problems: An after-image remains after the power has been turned off.
• No Power (Dead): Poor power connection between the monitors and wall outlet.
• Imaging problems: Image vibrates on the screen.

Software and firmware (2)

• SmartControl - SmartControl program: After installing SmartControl, when clicking on SmartControl tab, nothing shows up after a while or a failure message shows, what happened?
• SmartControl - SmartControl program: The SmartControl functions well at the beginning, but it is not workable, what can I do?