主頁
飛利浦 - 按一下這裡瀏覽至首頁

搜尋關鍵字

Q-CPR™ CPR meter

Q-CPR™ measurement and feedback tool

CPR meter

尋找類似產品

A CPR tool that has been designed to improve CPR delivery. Available as a fully integrated option with the HeartStart MRx and HeartStart FR3, it offers several vital advances, based on AHA Guidelines for CPR, and input from Q-CPR users.

聯繫我們

媒體庫

特點
Easy to use, fast to respond
Easy from the start

Easy from the start

Q-CPR is simple to set up and easy to use. It complements your ALS or BLS skills with objective performance data you can use to fine-tune your CPR technique – to help you enhance the quality of CPR performed and reduce treatment variability. With Q-CPR, you know that you’re pressing hard enough, deep enough, and fast enough.
Rich clinical information, driving patient care
Objective data you can use to achieve high-quality CPR

Objective data you can use to achieve high-quality CPR

When used in combination with Philips HeartStart Event Review Pro clinical software, Q-CPR is a comprehensive and flexible retrospective data review tool for debriefing, training, and continuous improvement. Event Review Pro captures and stores an entire code – including Q-CPR data for post-event review.
Built to endure, designed to evolve
Optimized for AHA 2010 CPR Guidelines

Optimized for AHA 2010 CPR Guidelines

Philips HeartStart MRx monitor/defibrillators and HeartStart FR3 AEDs with Q-CPR incorporate the AHA/ERC 2010 Guidelines and we’re committed to supporting the expert recommendations from these international thought leaders in resuscitation and emergency cardiac care.
Comprehensive audio feedback to support visual cues
Comprehensive audio feedback to support visual cues

Comprehensive audio feedback to support visual cues

Q-CPR offers protocol management and enhanced visual feedback in code view or AED mode on the HeartStart MRx display. You can turn voice prompts ON or OFF depending on your protocol and the environment where you’re delivering CPR.
Uniquely provides corrective guidance

Uniquely provides corrective guidance

The Q-CPR measurement and feedback tool uniquely provides corrective guidance on both the compression and ventilation components of CPR to help you reduce the likelihood of hyperventilation during resuscitation.
Q-CPR report card

Q-CPR report card

When used in combination with Philips HeartStart Event Review Pro clinical software, Q-CPR is a comprehensive and flexible retrospective data review tool for debriefing, training, and continuous improvement. Event Review Pro captures and stores an entire code – including Q-CPR data for post-event review. and follow-up debriefings.

技術指標

Measurements
Measurements
Compressions
  • Depth, rate, release (complete or incomplete) and duty cycle
Compression Depth Target
  • -1.50 to -2.00 " (-38 to -51 mm)
Compression Rate Target
  • 90 to 120 cpm
Ventilations
  • Volume/rate/inflation time
Graphic Indicator Ventilation Rate
  • 4-16 ventilations per minute or 9-16 vpm after performing rescue breathing following 60 seconds without compressions
Feedback Type
Feedback Type
Verbal
  • Prioritized corrective verbal feedback for all measurements
Numerical
  • Measurement values for compression rate/ventilation rate and no flow time (Code view only)
Graphical
  • Compression wave from with correct depth target zone. Lung icon for ventilation volume (Code view only)
User Interface
User Interface
Compression sensor weight
  • 8 oz

文件

小冊 (1)

小冊

  • 1 Ko PC, Chen WJ, Lin CH, et al. Evaluating the quality of pre-hospital cardiopulmonary resuscitation by reviewing automated external defibrillator records and survival for out-of-hospital witnessed arrests. Resuscitation. 2005;64:163-169.

By clicking on the link, you will be leaving the official Royal Philips Healthcare ("Philips") website. Any links to third-party websites that may appear on this site are provided only for your convenience and in no way represent any affiliation or endorsement of the information provided on those linked websites. Philips makes no representations or warranties of any kind with regard to any third-party websites or the information contained therein.

I understand